Calendar

REMOTE PARTICIPATION ONLY –
Members of the public wishing to observe or participate in this informational Community Meeting may do so by accessing the Zoom Webinar at the scheduled time through the following link:

https://burbankca.zoom.us/j/83626685796?pwd=U3F5eGpBbzloQTBoRDA2cEY0d0dLZz09

Meeting ID : 836 2668 5796, Password:  804661

• 228 S. Naomi Street (BWP Electrical Distribution Facility)
• Project No.  21-0002546
• The project is for the construction of a new unmanned electrical distribution facility with a new control room, new transformers and other related equipment. The project is located in the MDC-3 zoning district. The project is subject to the California Environmental Quality Act (CEQA). An Initial Study was completed and determined there is no substantial evidence of any potentially significant environmental effects. Therefore, a Mitigated Negative Declaration (MND) has been prepared and is available for public review/comment, which began on February 23, 2022; and will end on March 25, 2022. All comments will be considered by the Planning Board prior to any decision on the project.
• Contact Information: Joseph Onyebuchi

ADDITIONAL INFORMATION:

▪ No decision will be made on the project this evening. The purpose of this meeting is to inform area property owners and residents of the pending project, and to solicit input in advance of a decision being made on the Project.
▪ You may submit comments at any time, if you do not wish to speak. You can do so by e-mailing the listed Project Planner. You may also contact the Project Planner to seek additional information on the proposed project and/or to inquire on the status. During the project review period, project-related documents are also available at  www.burbankca.gov/pendingprojects .

INSTRUCTIONS FOR REMOTE COMMUNITY MEETING PARTICIPATION

To Participate on Your Computer  :

Please use the following link and meeting ID:

https://burbankca.zoom.us/j/83626685796?pwd=U3F5eGpBbzloQTBoRDA2cEY0d0dLZz09

Meeting ID : 836 2668 5796, Password:  804661

  To Participate by Phone  (with or without computer log-in): 

Call  ‐  in Number: 1-346-248-7799 (use Meeting ID and Password above)

 If participating via Zoom on your computer, please follow the below steps:

1. At the meeting start time, click the meeting link provided above.
   1. If Zoom is not already installed on your computer : click “Download & Run Zoom” on the launch page and press “Run” when prompted by your browser.
   2. If Zoom has been previously installed on your computer:  Please allow a few moments for the application to launch automatically.
2. Select “Join Audio via Computer.” Your audio will be muted when you join the meeting.
3. The virtual conference room will open; your microphone will be muted but you will hear audio from the meeting host once they’ve started to speak. If you receive a message “Please wait for the host to start the meeting,” simply remain in the room until the meeting begins.
4. Once the meeting is underway, an overview of the project will be provided and then Planning Staff will invite attendees to provide comments or questions.
5. To make a comment or ask a question: Once the host invites attendees to provide comments or questions, use the “raise hand” function located in the Zoom participant window on your computer and wait for Planning staff to announce your name to speak. Staff will unmute your line when it is your turn to speak. Please note, in order to give all attendees an opportunity to speak in a timely manner, staff may limit comments/questions to 5 minutes per speaker.

If participating by phone*, please follow the below steps :

(*if you will be launching the meeting video on your computer while listening through your phone, please first follow the steps above for joining by computer)

1. At the meeting start time, dial the number provided at the top of the page and enter the meeting ID and Password provided. Once the information is entered, an automated voice will notify you that you have joined the meeting.
2. Your audio will be muted when you join the meeting.
3. Once the meeting is underway, an overview of the project will be provided and then Planning Staff will invite attendees to provide comments or questions.
4. To make a comment or ask a question: Once the host invites attendees to provide comments or questions, use the “raise hand” function by dialing *9 on your phone and wait for Planning staff to announce your name to speak. Staff will invite you to unmute your line when it is your turn to speak. Dial *6 to unmute yourself. Please note, in order to give all attendees an opportunity to speak in a timely manner, staff may limit comments/questions to 5 minutes per speaker.

PLEASE NOTE  : If you have concerns regarding your ability to participate in the online community meeting, please contact the Project Planner listed in advance of the meeting in order to make  arrangements for participation.